HOT TUB SYSTEM FLUSH

Concentrated flush for the internal pipe-work of hot tubs and spas

hot tub system flush
HOT TUB SYSTEM FLUSH

GENERAL INSTRUCTIONS

  1. Remove filter cartridge from filter compartment.
  2. Ensure water level is at least 50mm above the jets.
  3. Turn the hot tub/spa to run and empty the required dose into the filter compartment (see table below).
  4. Run your hot tub/spa for a minimum of 30 minutes.
  5. Turn off the hot tub/spa for 30 minutes.
  6. Run the hot tub/spa for a further 30 minutes.
  7. Drain the hot tub/spa and using a garden hose wash away any debris from around the shell and jets.
  8. Refill with fresh water.
  9. Sanitise the spa/hot tub with your chosen disinfectant prior to re-using.

HOT TUB SYSTEM FLUSH DOSE RATE TABLE

Water Volume Dose
Up to 1,300 Litres 250ml
1,300 to 2,600 Litres 500ml

N.B. For normal use, treatment should be carried out at least every 12 weeks prior to drain down as this will assist in the removal of waste build up. For heavy use, treatment should be carried out on a 6-week basis.

Download Technical Sheet

OUR OTHER HOT TUB PRODUCTS…
Pool Chemicals
Vinyl Restorer & Protector
Pool Chemicals
Ultra Spa Clarifier
Pool Chemicals
Instant Filter Cleaner
Pool Chemicals
Hot Tub & Spa Polish
Pool Chemicals
Spa Leak Sealer