BULK STARVER®

Removes low levels of phosphate in swimming pools.

BULK STARVER®

GENERAL INSTRUCTIONS

CAUTION: If algae is present this must be treated with a Lo-Chlor Algaecide prior to application.

  1. Calculate the volume required from the table below.
  2. Pre-dilute the product in a clean plastic container.
  3. Set the pool filter to RE-CIRCULATE. Where this setting is not available, remove the filter cartridges or grids before operating the filter.
  4. Adjust the pH to 7.8 and super chlorinate the pool with a registered sanitiser.
  5. Turn on the pump, and evenly distribute the product around the pool.
  6. Run the pump for 1 to 2 hours and turn off.
  7. Leave the pool for all residue to settle, usually within 12 to 24 hours.
  8. Vacuum to waste.
  9. Replace filter cartridges or grids, where necessary.
  10. Resume normal filtration and correctly balance the pool water.

BULK STARVER® DOSE RATE

Pool Volume Dose
Gallons Litres  
11,000 50,000 1000ml
22,000 100,000 2000ml
55,000 250,000 5000ml

Download Technical Sheet