KNOCK-OUT ALGAECIDE

Specially formulated to kill and control all algae forms

KNOCK-OUT ALGAECIDE

GENERAL INSTRUCTIONS

  1. For best results adjust the pH to 6.8-7.0.
  2. Turn off the pump and filter prior to adding the Knock-Out Algaecide.
  3. Pour the required dose (use the Dose Rate Table below) near the algae. The water may foam initially. Brushing may be required for stubborn areas of algal growth.
  4. After 2 hours turn on the pump and filter.
  5. Because the dead algae are collected in the filter, a backwash will be necessary.

For perfect pool water, it is recommended that Knock-Out Algaecide is used in conjunction with one of our phosphate removal products such as Lo-Chlor Starver® and Starver® X. Removing phosphate prior to adding algaecides ensures the product remains effective for longer.

KNOCK-OUT ALGAECIDE DOSE RATE TABLE

Pool Volume Dose
Gallons Litres  Initial  Maintenance
2,200 10,000 500ml 100ml
6,600 30,000 1500ml 300ml
13,200 60,000 3000ml 600ml
19,800 90,000 4500ml 900ml

Download Technical Sheet

ALSO CONSIDER…

For perfect pool water, it is recommended that Knock-Out Algaecide is used in conjunction with one of our phosphate removal products such as Lo-Chlor Starver® and Starver® X. Removing phosphates, prior to adding algaecides, ensures the product remains effective for longer.