MAXI-FLOC PLUS

Fast acting heavy duty flocculant that restores clarity to cloudy pools

MAXI-FLOC PLUS

GENERAL INSTRUCTIONS

  1. Calculate the volume of Maxi-Floc Plus required from the table below.
  2. Pre-dilute the product in a clean plastic container.
  3. Set the pool filter to RE-CIRCULATE. Where this setting is not available, remove the filter cartridges or grids before operating the filter.
  4. Adjust the pH to 7.8 to achieve best results.
  5. Evenly distribute around the pool with the pump and filter running.
  6. Run the pump for 1 to 2 hours and turn off.
  7. Leave the pool until all residue settles (within six hours).
  8. Vacuum to waste.
  9. Replace filter cartridges or grids, where necessary.
  10. Resume normal filtration and correctly balance the pool water.

MAXI-FLOC PLUS DOSE RATE TABLE

Pool Volume Dose
Gallons Litres  
5,500 25,000 500ml
11,000 50,000 1000ml
16,500 75,000 1250ml

Download Technical Sheet

ALSO CONSIDER…

Once the clarity has been restored to your pool we recommend one of our regular use clarifiers to ensure this doesn’t become a problem again.

Miraclear Pool Clarifier
Miraclear Pool Clarifier
Ultra Pool Clarifier
Ultra Pool Clarifier+
Miraclear Clarifier Cube
Miraclear Clarifier Cube