NO MORE METAL

Removes dissolved metals from pools

NO MORE METAL

GENERAL INSTRUCTIONS

Stain Treatment & Prevention

  1. Water must be correctly balanced. Unbalance water is the cause of most stain and scale problems.
  2. Ensure the pump and filter are running as normal.
  3. Follow the dose rate below and add the required dose to the pool water. Allow pool water to filter for a minimum of 12 hours after treatment.
  4. Use a double dose for severe staining.
  5. Continued use of this product helps prevent staining from returning.

Initial Fill of New Pools

Mix 50ml in a clean plastic bucket of water and add to the pool for every 5,000 litres of pool water. Repeat this procedure as the pool is filling.

DOSE RATES

Stain Treatment & Prevention – 500mls per 50,000 litres (11,000 gallons) of pool water.
Initial Fill of New Pools – 50ml per 5,000 litres (1,100 gallons) of pool water.

N.B. Pools should not be shock treated within 48 hours of the addition of No More Metal. This product must be used alongside Multi Stain Remover in all stain treatments to ensure released metal ions are sequestered, otherwise repeated staining may occur.

Download Technical Sheet

ALSO CONSIDER…

This product must be used alongside Multi Stain Remover in all stain treatments to ensure released metal ions are sequestered, otherwise repeated staining may occur.

Miraclear Clarifier Cube
Miraclear Clarifier Cube
Miraclear Pool Clarifier
Miraclear Pool Clarifier
Multi Stain Remover
Multi Stain Remover