NO MORE SCALE

Prevents and removes calcium deposits

No More Scale
NO MORE SCALE

Phosphate Free – does not contribute unwanted phosphates like alternative products

Prevents metal staining & corrosion of pool heating equipment

Prevents scum deposits on pool surfaces

Prevents plugging of filters

Available in 1Ltr & 5Ltr

GENERAL INSTRUCTIONS

  1. No More Scale should be added at the start of the season during spring open up.
  2. Calculate the required amount from the dose rate below.
  3. Ensure that the pump and filter are running as normal.
  4. Mix the calculated dose in a clean bucket with water and evenly distribute around the pool. DO NOT ADD VIA THE SKIMMER SYSTEM.
  5. Filter as normal.

DOSE RATES

Initial & Final = 500mls per 50,000 litres of pool water
Monthly Maintenance = 100ml per 50,000 litres of pool water

After the Initial Dose has been added continue to apply the product on a monthly basis to ensure constant scale protection all year round. To remove discolouration on waterline tiles, raise the water level above the waterline level and maintain for at least 3 weeks.

A final treatment is recommended when the pool is winterised or will be idle for a long period of time. The main causes of scale formation are generally high levels of calcium and poor water balance, metal stains form due to incorrectly balanced water.

Download Technical Sheet