SLATTED COVER CLEANER

Descaler for slatted pool covers.

Salt Cell Cleaner
SLATTED COVER CLEANER

GENERAL INSTRUCTIONS

  1. Wear protective clothing including goggles, gloves and a respiratory mask when using this product.
  2. Predilute the product as necessary in clean plastic container following the dose rates below.
  3. Apply the resultant solution to the cover using a suitable brush, ensuring maximum coverage of the affected areas.
  4. Leave the product on the cover/surround for a maximum of 10 minutes. For older scale deposits further brushing may be required.
  5. Thoroughly rinse the surface with freshwater post treatment.

SLATTED COVER CLEANER DILUTION TABLE

Heavy Scale Deposits Light Scale Deposits
1 part product to 3 parts water 1 part product to 10 parts water

Please note the following: The product is acidic therefore post treatment always check the pool water balance and adjust if necessary. Any other pool fabrics that are sensitive to acid, such as marble, chrome, stainless steel, aluminium and enamel should be covered during the application, cleaning, and rinse phases above. This will protect them from any splashes that may occur.

Download Technical Sheet

ALSO CONSIDER…

If you are operating your system in a hard water area, then we recommend use of No More Scale.